In compliance with UK Building Regulations in England and Wales, all electrical pond equipment must be sold without a fitted moulded plug. This regulation is designed to ensure safety and proper installation, and although it may cause some inconvenience, we are required to adhere to these rules.

If you need help with the installation or wiring of your pond pump, please don’t hesitate to contact our customer services team.

Important Information:

  • Safety First: Always ensure the pump is wired safely into an approved external RCD (Residual Current Device) switch with a rated residual operating current not exceeding 30mA.
  • Earth the Pump: This unit must be earthed.
  • Fuse Ratings: Never use a higher-rated fuse than specified in the product manual.
  • Voltage Compatibility: Do NOT connect the pump to any voltage other than that specified on the unit.

For detailed guidance on electrical safety in pond installations, please refer to our Pond Electrical Safety Guide below.


We strongly recommend consulting a qualified electrician if you are unsure about any aspect of the wiring or installation process to ensure safety and compliance.


UK Pond Electrical Safety Guidelines:

1. Use of Electrical Equipment:

  • All electrical equipment installed in or near water must be suitable for outdoor use and rated to handle moisture and water exposure.
  • Electrical devices like pond pumps, lights, and UV filters should comply with the IP (Ingress Protection) rating system, ensuring they are protected against water ingress.

2. Residual Current Devices (RCDs):

  • Electrical equipment near water must be connected to an RCD to protect against electric shocks.
  • The RCD must trip the circuit if there is a fault that could lead to a shock, typically with a maximum residual current rating of 30mA.

3. Earth Bonding:

  • All pond electrical equipment must be earthed. This helps prevent electric shock from faulty equipment. If a piece of equipment is metal, it must be connected to earth wiring to safely redirect any faults.

4. Outdoor Wiring:

  • All wiring used outdoors must be suitable for wet environments. You should use cables rated for outdoor use with UV protection and proper insulation.
  • Any wiring should be protected against physical damage, and connections should be securely made in weatherproof junction boxes.

5. Safety Distance:

  • Any electrical equipment must be kept at a safe distance from the water. For example, outdoor power outlets should be a minimum of 2 meters away from the water’s edge to reduce the risk of accidental electrocution.
  • Ideally, pond equipment should be installed at ground level, away from places where people may be walking or standing in the water.

6. Regular Inspection and Maintenance:

  • Regularly check for wear and tear on cables, equipment, and plugs.
  • Maintain your RCDs, and ensure that they’re tested at least once every six months.

7. Qualified Electricians:

  • It’s always recommended to use a qualified electrician when installing or repairing electrical components for your pond. They’ll ensure that all installations comply with safety standards and regulations.

8. Compliance with Building Regulations:

  • All electrical work should adhere to Part P of the UK Building Regulations, which governs the safety of electrical systems in homes and gardens.